Interpolationssökning
Givet en sorterad array med n likformigt fördelade värden arr[] skriv en funktion för att söka efter ett visst element x i arrayen.
Linjär sökning hittar elementet i O(n) tid Hoppa Sök tar O(n) tid och Binär sökning tar O(log n) tid.
Interpolationssökningen är en förbättring jämfört med Binär sökning till exempel där värdena i en sorterad array är likformigt fördelade. Interpolation konstruerar nya datapunkter inom intervallet för en diskret uppsättning kända datapunkter. Binär sökning går alltid till mittelementet för att kontrollera. Å andra sidan kan interpolationssökning gå till olika platser beroende på värdet på nyckeln som söks. Till exempel om värdet på nyckeln är närmare det sista elementet, kommer interpolationssökningen sannolikt att starta sökningen mot slutsidan.
För att hitta positionen som ska sökas använder den följande formel.
// Tanken med formeln är att returnera högre värde på pos
// när element som ska sökas är närmare arr[hi]. Och
// mindre värde när närmare arr[lo]arr[] ==> Array där element behöver sökas
x ==> Element som ska sökas
lo ==> Startindex i arr[]
hej ==> Avslutar index i arr[]
efter = +
Det finns många olika interpolationsmetoder och en sådan är känd som linjär interpolation. Linjär interpolation tar två datapunkter som vi antar som (x1y1) och (x2y2) och formeln är: vid punkt(xy).
Denna algoritm fungerar på ett sätt som vi söker efter ett ord i en ordbok. Interpolationssökningsalgoritmen förbättrar den binära sökalgoritmen. Formeln för att hitta ett värde är: K = > K är en konstant som används för att begränsa sökutrymmet. Vid binär sökning är värdet för denna konstant: K=(låg+hög)/2.
Formeln för pos kan härledas enligt följande.
Let's assume that the elements of the array are linearly distributed.
General equation of line : y = m*x + c.
y is the value in the array and x is its index.
Now putting value of lohi and x in the equation
arr[hi] = m*hi+c ----(1)
arr[lo] = m*lo+c ----(2)
x = m*pos + c ----(3)
m = (arr[hi] - arr[lo] )/ (hi - lo)
subtracting eqxn (2) from (3)
x - arr[lo] = m * (pos - lo)
lo + (x - arr[lo])/m = pos
pos = lo + (x - arr[lo]) *(hi - lo)/(arr[hi] - arr[lo])Algoritm
Resten av interpolationsalgoritmen är densamma förutom partitionslogiken ovan.
- Steg 1: Beräkna värdet på 'pos' i en slinga med hjälp av probepositionsformeln.
- Steg 2: Om det är en match returnera objektets index och avsluta.
- Steg 3: Om objektet är mindre än arr[pos] beräkna sondpositionen för den vänstra sub-arrayen. Beräkna annars detsamma i den högra sub-arrayen.
- Steg 4: Upprepa tills en matchning hittas eller sub-arrayen reduceras till noll.
Nedan är implementeringen av algoritmen.
// C++ program to implement interpolation // search with recursion #include using namespace std ; // If x is present in arr[0..n-1] then returns // index of it else returns -1. int interpolationSearch ( int arr [] int lo int hi int x ) { int pos ; // Since array is sorted an element present // in array must be in range defined by corner if ( lo <= hi && x >= arr [ lo ] && x <= arr [ hi ]) { // Probing the position with keeping // uniform distribution in mind. pos = lo + ((( double )( hi - lo ) / ( arr [ hi ] - arr [ lo ])) * ( x - arr [ lo ])); // Condition of target found if ( arr [ pos ] == x ) return pos ; // If x is larger x is in right sub array if ( arr [ pos ] < x ) return interpolationSearch ( arr pos + 1 hi x ); // If x is smaller x is in left sub array if ( arr [ pos ] > x ) return interpolationSearch ( arr lo pos - 1 x ); } return -1 ; } // Driver Code int main () { // Array of items on which search will // be conducted. int arr [] = { 10 12 13 16 18 19 20 21 22 23 24 33 35 42 47 }; int n = sizeof ( arr ) / sizeof ( arr [ 0 ]); // Element to be searched int x = 18 ; int index = interpolationSearch ( arr 0 n - 1 x ); // If element was found if ( index != -1 ) cout < < 'Element found at index ' < < index ; else cout < < 'Element not found.' ; return 0 ; } // This code is contributed by equbalzeeshan
C // C program to implement interpolation search // with recursion #include // If x is present in arr[0..n-1] then returns // index of it else returns -1. int interpolationSearch ( int arr [] int lo int hi int x ) { int pos ; // Since array is sorted an element present // in array must be in range defined by corner if ( lo <= hi && x >= arr [ lo ] && x <= arr [ hi ]) { // Probing the position with keeping // uniform distribution in mind. pos = lo + ((( double )( hi - lo ) / ( arr [ hi ] - arr [ lo ])) * ( x - arr [ lo ])); // Condition of target found if ( arr [ pos ] == x ) return pos ; // If x is larger x is in right sub array if ( arr [ pos ] < x ) return interpolationSearch ( arr pos + 1 hi x ); // If x is smaller x is in left sub array if ( arr [ pos ] > x ) return interpolationSearch ( arr lo pos - 1 x ); } return -1 ; } // Driver Code int main () { // Array of items on which search will // be conducted. int arr [] = { 10 12 13 16 18 19 20 21 22 23 24 33 35 42 47 }; int n = sizeof ( arr ) / sizeof ( arr [ 0 ]); int x = 18 ; // Element to be searched int index = interpolationSearch ( arr 0 n - 1 x ); // If element was found if ( index != -1 ) printf ( 'Element found at index %d' index ); else printf ( 'Element not found.' ); return 0 ; }
Java // Java program to implement interpolation // search with recursion import java.util.* ; class GFG { // If x is present in arr[0..n-1] then returns // index of it else returns -1. public static int interpolationSearch ( int arr [] int lo int hi int x ) { int pos ; // Since array is sorted an element // present in array must be in range // defined by corner if ( lo <= hi && x >= arr [ lo ] && x <= arr [ hi ] ) { // Probing the position with keeping // uniform distribution in mind. pos = lo + ((( hi - lo ) / ( arr [ hi ] - arr [ lo ] )) * ( x - arr [ lo ] )); // Condition of target found if ( arr [ pos ] == x ) return pos ; // If x is larger x is in right sub array if ( arr [ pos ] < x ) return interpolationSearch ( arr pos + 1 hi x ); // If x is smaller x is in left sub array if ( arr [ pos ] > x ) return interpolationSearch ( arr lo pos - 1 x ); } return - 1 ; } // Driver Code public static void main ( String [] args ) { // Array of items on which search will // be conducted. int arr [] = { 10 12 13 16 18 19 20 21 22 23 24 33 35 42 47 }; int n = arr . length ; // Element to be searched int x = 18 ; int index = interpolationSearch ( arr 0 n - 1 x ); // If element was found if ( index != - 1 ) System . out . println ( 'Element found at index ' + index ); else System . out . println ( 'Element not found.' ); } } // This code is contributed by equbalzeeshan
Python # Python3 program to implement # interpolation search # with recursion # If x is present in arr[0..n-1] then # returns index of it else returns -1. def interpolationSearch ( arr lo hi x ): # Since array is sorted an element present # in array must be in range defined by corner if ( lo <= hi and x >= arr [ lo ] and x <= arr [ hi ]): # Probing the position with keeping # uniform distribution in mind. pos = lo + (( hi - lo ) // ( arr [ hi ] - arr [ lo ]) * ( x - arr [ lo ])) # Condition of target found if arr [ pos ] == x : return pos # If x is larger x is in right subarray if arr [ pos ] < x : return interpolationSearch ( arr pos + 1 hi x ) # If x is smaller x is in left subarray if arr [ pos ] > x : return interpolationSearch ( arr lo pos - 1 x ) return - 1 # Driver code # Array of items in which # search will be conducted arr = [ 10 12 13 16 18 19 20 21 22 23 24 33 35 42 47 ] n = len ( arr ) # Element to be searched x = 18 index = interpolationSearch ( arr 0 n - 1 x ) if index != - 1 : print ( 'Element found at index' index ) else : print ( 'Element not found' ) # This code is contributed by Hardik Jain
C# // C# program to implement // interpolation search using System ; class GFG { // If x is present in // arr[0..n-1] then // returns index of it // else returns -1. static int interpolationSearch ( int [] arr int lo int hi int x ) { int pos ; // Since array is sorted an element // present in array must be in range // defined by corner if ( lo <= hi && x >= arr [ lo ] && x <= arr [ hi ]) { // Probing the position // with keeping uniform // distribution in mind. pos = lo + ((( hi - lo ) / ( arr [ hi ] - arr [ lo ])) * ( x - arr [ lo ])); // Condition of // target found if ( arr [ pos ] == x ) return pos ; // If x is larger x is in right sub array if ( arr [ pos ] < x ) return interpolationSearch ( arr pos + 1 hi x ); // If x is smaller x is in left sub array if ( arr [ pos ] > x ) return interpolationSearch ( arr lo pos - 1 x ); } return - 1 ; } // Driver Code public static void Main () { // Array of items on which search will // be conducted. int [] arr = new int []{ 10 12 13 16 18 19 20 21 22 23 24 33 35 42 47 }; // Element to be searched int x = 18 ; int n = arr . Length ; int index = interpolationSearch ( arr 0 n - 1 x ); // If element was found if ( index != - 1 ) Console . WriteLine ( 'Element found at index ' + index ); else Console . WriteLine ( 'Element not found.' ); } } // This code is contributed by equbalzeeshan
JavaScript < script > // Javascript program to implement Interpolation Search // If x is present in arr[0..n-1] then returns // index of it else returns -1. function interpolationSearch ( arr lo hi x ){ let pos ; // Since array is sorted an element present // in array must be in range defined by corner if ( lo <= hi && x >= arr [ lo ] && x <= arr [ hi ]) { // Probing the position with keeping // uniform distribution in mind. pos = lo + Math . floor ((( hi - lo ) / ( arr [ hi ] - arr [ lo ])) * ( x - arr [ lo ]));; // Condition of target found if ( arr [ pos ] == x ){ return pos ; } // If x is larger x is in right sub array if ( arr [ pos ] < x ){ return interpolationSearch ( arr pos + 1 hi x ); } // If x is smaller x is in left sub array if ( arr [ pos ] > x ){ return interpolationSearch ( arr lo pos - 1 x ); } } return - 1 ; } // Driver Code let arr = [ 10 12 13 16 18 19 20 21 22 23 24 33 35 42 47 ]; let n = arr . length ; // Element to be searched let x = 18 let index = interpolationSearch ( arr 0 n - 1 x ); // If element was found if ( index != - 1 ){ document . write ( `Element found at index ${ index } ` ) } else { document . write ( 'Element not found' ); } // This code is contributed by _saurabh_jaiswal < /script>
PHP // PHP program to implement $erpolation search // with recursion // If x is present in arr[0..n-1] then returns // index of it else returns -1. function interpolationSearch ( $arr $lo $hi $x ) { // Since array is sorted an element present // in array must be in range defined by corner if ( $lo <= $hi && $x >= $arr [ $lo ] && $x <= $arr [ $hi ]) { // Probing the position with keeping // uniform distribution in mind. $pos = ( int )( $lo + ((( double )( $hi - $lo ) / ( $arr [ $hi ] - $arr [ $lo ])) * ( $x - $arr [ $lo ]))); // Condition of target found if ( $arr [ $pos ] == $x ) return $pos ; // If x is larger x is in right sub array if ( $arr [ $pos ] < $x ) return interpolationSearch ( $arr $pos + 1 $hi $x ); // If x is smaller x is in left sub array if ( $arr [ $pos ] > $x ) return interpolationSearch ( $arr $lo $pos - 1 $x ); } return - 1 ; } // Driver Code // Array of items on which search will // be conducted. $arr = array ( 10 12 13 16 18 19 20 21 22 23 24 33 35 42 47 ); $n = sizeof ( $arr ); $x = 47 ; // Element to be searched $index = interpolationSearch ( $arr 0 $n - 1 $x ); // If element was found if ( $index != - 1 ) echo 'Element found at index ' . $index ; else echo 'Element not found.' ; return 0 ; #This code is contributed by Susobhan Akhuli ?>
Produktion
Element found at index 4
Tidskomplexitet: O(log 2 (logga 2 n)) för genomsnittsfallet och O(n) för det värsta fallet
Extra rymdkomplexitet: O(1)
Ett annat tillvägagångssätt: -
Detta är iterationsmetoden för interpolationssökningen.
- Steg 1: Beräkna värdet på 'pos' i en slinga med hjälp av probepositionsformeln.
- Steg 2: Om det är en match returnera objektets index och avsluta.
- Steg 3: Om objektet är mindre än arr[pos] beräkna sondpositionen för den vänstra sub-arrayen. Beräkna annars detsamma i den högra sub-arrayen.
- Steg 4: Upprepa tills en matchning hittas eller sub-arrayen reduceras till noll.
Nedan är implementeringen av algoritmen.
C++ // C++ program to implement interpolation search by using iteration approach #include using namespace std ; int interpolationSearch ( int arr [] int n int x ) { // Find indexes of two corners int low = 0 high = ( n - 1 ); // Since array is sorted an element present // in array must be in range defined by corner while ( low <= high && x >= arr [ low ] && x <= arr [ high ]) { if ( low == high ) { if ( arr [ low ] == x ) return low ; return -1 ; } // Probing the position with keeping // uniform distribution in mind. int pos = low + ((( double )( high - low ) / ( arr [ high ] - arr [ low ])) * ( x - arr [ low ])); // Condition of target found if ( arr [ pos ] == x ) return pos ; // If x is larger x is in upper part if ( arr [ pos ] < x ) low = pos + 1 ; // If x is smaller x is in the lower part else high = pos - 1 ; } return -1 ; } // Main function int main () { // Array of items on whighch search will // be conducted. int arr [] = { 10 12 13 16 18 19 20 21 22 23 24 33 35 42 47 }; int n = sizeof ( arr ) / sizeof ( arr [ 0 ]); int x = 18 ; // Element to be searched int index = interpolationSearch ( arr n x ); // If element was found if ( index != -1 ) cout < < 'Element found at index ' < < index ; else cout < < 'Element not found.' ; return 0 ; } //this code contributed by Ajay Singh
Java // Java program to implement interpolation // search with recursion import java.util.* ; class GFG { // If x is present in arr[0..n-1] then returns // index of it else returns -1. public static int interpolationSearch ( int arr [] int lo int hi int x ) { int pos ; if ( lo <= hi && x >= arr [ lo ] && x <= arr [ hi ] ) { // Probing the position with keeping // uniform distribution in mind. pos = lo + ((( hi - lo ) / ( arr [ hi ] - arr [ lo ] )) * ( x - arr [ lo ] )); // Condition of target found if ( arr [ pos ] == x ) return pos ; // If x is larger x is in right sub array if ( arr [ pos ] < x ) return interpolationSearch ( arr pos + 1 hi x ); // If x is smaller x is in left sub array if ( arr [ pos ] > x ) return interpolationSearch ( arr lo pos - 1 x ); } return - 1 ; } // Driver Code public static void main ( String [] args ) { // Array of items on which search will // be conducted. int arr [] = { 10 12 13 16 18 19 20 21 22 23 24 33 35 42 47 }; int n = arr . length ; // Element to be searched int x = 18 ; int index = interpolationSearch ( arr 0 n - 1 x ); // If element was found if ( index != - 1 ) System . out . println ( 'Element found at index ' + index ); else System . out . println ( 'Element not found.' ); } }
Python # Python equivalent of above C++ code # Python program to implement interpolation search by using iteration approach def interpolationSearch ( arr n x ): # Find indexes of two corners low = 0 high = ( n - 1 ) # Since array is sorted an element present # in array must be in range defined by corner while low <= high and x >= arr [ low ] and x <= arr [ high ]: if low == high : if arr [ low ] == x : return low ; return - 1 ; # Probing the position with keeping # uniform distribution in mind. pos = int ( low + ((( float ( high - low ) / ( arr [ high ] - arr [ low ])) * ( x - arr [ low ])))) # Condition of target found if arr [ pos ] == x : return pos # If x is larger x is in upper part if arr [ pos ] < x : low = pos + 1 ; # If x is smaller x is in lower part else : high = pos - 1 ; return - 1 # Main function if __name__ == '__main__' : # Array of items on whighch search will # be conducted. arr = [ 10 12 13 16 18 19 20 21 22 23 24 33 35 42 47 ] n = len ( arr ) x = 18 # Element to be searched index = interpolationSearch ( arr n x ) # If element was found if index != - 1 : print ( 'Element found at index' index ) else : print ( 'Element not found' )
C# // C# program to implement interpolation search by using // iteration approach using System ; class Program { // Interpolation Search function static int InterpolationSearch ( int [] arr int n int x ) { int low = 0 ; int high = n - 1 ; while ( low <= high && x >= arr [ low ] && x <= arr [ high ]) { if ( low == high ) { if ( arr [ low ] == x ) return low ; return - 1 ; } int pos = low + ( int )((( float )( high - low ) / ( arr [ high ] - arr [ low ])) * ( x - arr [ low ])); if ( arr [ pos ] == x ) return pos ; if ( arr [ pos ] < x ) low = pos + 1 ; else high = pos - 1 ; } return - 1 ; } // Main function static void Main ( string [] args ) { int [] arr = { 10 12 13 16 18 19 20 21 22 23 24 33 35 42 47 }; int n = arr . Length ; int x = 18 ; int index = InterpolationSearch ( arr n x ); if ( index != - 1 ) Console . WriteLine ( 'Element found at index ' + index ); else Console . WriteLine ( 'Element not found' ); } } // This code is contributed by Susobhan Akhuli
JavaScript // JavaScript program to implement interpolation search by using iteration approach function interpolationSearch ( arr n x ) { // Find indexes of two corners let low = 0 ; let high = n - 1 ; // Since array is sorted an element present // in array must be in range defined by corner while ( low <= high && x >= arr [ low ] && x <= arr [ high ]) { if ( low == high ) { if ( arr [ low ] == x ) { return low ; } return - 1 ; } // Probing the position with keeping // uniform distribution in mind. let pos = Math . floor ( low + ((( high - low ) / ( arr [ high ] - arr [ low ])) * ( x - arr [ low ]))); // Condition of target found if ( arr [ pos ] == x ) { return pos ; } // If x is larger x is in upper part if ( arr [ pos ] < x ) { low = pos + 1 ; } // If x is smaller x is in lower part else { high = pos - 1 ; } } return - 1 ; } // Main function let arr = [ 10 12 13 16 18 19 20 21 22 23 24 33 35 42 47 ]; let n = arr . length ; let x = 18 ; // Element to be searched let index = interpolationSearch ( arr n x ); // If element was found if ( index != - 1 ) { console . log ( 'Element found at index' index ); } else { console . log ( 'Element not found' ); }
Produktion
Element found at index 4
Tidskomplexitet: O(log2(log2 n)) för medelfallet och O(n) för det värsta fallet
Extra rymdkomplexitet: O(1)
